Badger Meter Impeller Data Industrial 3050 Series, Руководство пользователя

Страница: 16 / 32

DISPLAY AND KEYPAD
The Series 3050 BTU flow monitor has a two line by 16-character display with two modes of operation and 5 keys on the front
panel for programming .
Menu 1-Switch to main menu
2-Backward/Previous menu Up Arrow 1-Select Menu option
2-Increase numerical value
Enter 1-Save value
2-Forward/Next menu
Down
Arrow
1-Select Menu option
2-Decrease numerical value
Right
Arrow
1-Select Menu option
2-Move cursor to the right
When the Series 3050 BTU flow monitor is first powered up, it runs through internal self checks while displaying
“ Badger Meter DIC Initializing." At the end of this cycle its normal mode display will appear .
In the normal mode, if still using the factory defaults, flow rate will be displayed on the top line, and flow total displayed on
the bottom . Both lines can be custom-defined in the field as desired . In the normal mode the
Enter
key has no function .
0.0 GPM
0.0 gal
Menu Enter
Figure 17: Normal mode display
The other mode is the program mode, used to configure the unit . Press
Menu
to enter and exit this mode . See "Programming"
on page 17 .
Menu Enter
RESET SETUP DIAG
Figure 18: Program mode display
Display and Keypad
Page 16 June 2018 DSY-UM-01668-EN-02