Badger Meter HR-LCD Pulse, Руководство по программированию

Страница: 12 / 24

Programmer Parameters
Meter Model/Size Field
The Meter Model/Size field ( Figure 17 ) auto-populates based on the Meter Type selected .
Click the drop-down menu to the right of the data field to select a Meter Model . Meter Sizes corresponding to the Meter
Models in the drop-down menu are shown in the table below Figure 17 .
Figure 17: Meter Model and Size
For Recordall® Combination Fire Service meters and assemblies, refer to the Disc and TSM columns of the table .
Disc (inches) Model CSM (inches) Model TSM (inches) Model
5/8, 5/8 x 3/4 LP 2 High Side 1-1/2 T160
5/8, 5/8 x 3/4 M25 2 Low Side 2 T200
3/4 M35 3 High Side 3 T450
1 M40 3 Low Side 4 T1000
1 M55 4 High Side 6 T2000
1 M70 4 Low Side 8 T3500
1-1/2 M120 6 High Side 10 T5500
2 M170 6 Low Side 12 T6200
16 T6600
20 T10000
Unit of Measure Field
The Unit of Measure field ( Figure 18 ) displays the unit selected to measure the flow .
Click the drop-down menu to the right of the data field to select a Unit of Measure . The Billing Units field changes based on
the Unit of Measure selection .
Figure 18: Unit of Measure
Page 12 May 2018 REG-PM-02658-EN-01