Using the Programmer Software
Change Current Settings
To change the register settings and set a new default value for any of the data fields, follow this procedure .
1 . Click the drop-down menu to the right of the field to display a list of values .
2 . Click the value you want to set as the default for that field .
OTEE:
N
The field label changes to bold text, indicating a new, unprogrammed value is selected . See
.
You must set the default value for the
Meter Type
field before you set the
Meter Model / Size
. The
Billing Units
change
automatically when you change the
Unit of Measure
. The
Unit of Measure
value does
not
have to be the same as the
Rate of
Flow
Units.
(Even in a cubic foot meter, the flow rate can be gallons per minute .)
Figure 13: Unprogrammed values
Apply Current Settings
After changing a setting, you must apply the change to program the new value to the register .
With the IR head aligned, click Apply Current Settings to program the new values to the register .
The new values display on the screen and the field labels are no longer bold . The register also goes into storage mode . In
storage mode, the register displays the
meter type, digit resolution from the register
and
unit of measure
.
is an example
of a Model 35 Disc Meter register display with a 9-digit output, measuring in gallons .
GAL
Figure 14: Meter type, digit resolution from the register and unit of measure
Updating Multiple Registers
If you want to program multiple registers with the same settings, attach the IR head bracket with the IR cable to each register,
one at a time, and click Apply Current Settings to program each register with the same settings .
OTEE:
N
Do not Read the subsequent register(s) before clicking Apply Current Settings .
Page 10
May 2018
REG-PM-02658-EN-01
