Antennas
ANTENNAS
The gateway ships in a direct mount configuration with the TX/RX antennas attached .
Attach the Backhaul Antenna
1 . Remove the plastic cover from the Type N female connector on the backhaul antenna bracket .
2 . Remove the backhaul antenna from the carton .
3 . Thread the Type N male connector (antenna) onto the Type N female connector on the backhaul antenna bracket .
OTEE:
N
See
"Backhaul Antenna Bracket" on page 12
for additional mounting information .
4 . Hand tighten until finger tight . Then use pliers or a strap wrench to tighten an additional 1/16 inch turn (maximum) .
Do not over-tighten or the connector can be damaged .
Page 9
April 2015
GXY-UM-00760-EN-01
