Badger Meter Dynasonics DTTSU Скачать руководство пользователя страница 2

Страница: 2 / 4

Piping Configurations and Transducer Positioning

shows the number of pipe diameters required downstream and upstream of the transducers for various

piping configurations.

Flow

Figure 2: Piping configuration and transducer positioning

The system will provide repeatable measurements on piping systems that do

not

meet these pipe diameter requirements, but

the accuracy of the readings may be influenced.

Pre-Installation Requirements

Page 2

March 2021

IND-UM-02647-EN-02

Содержание Dynasonics DTTSU

Страница 1: ...n front of the transducer should be 20 in and the minimum downstream pipe behind the transducer should be at least 10 in Pipe runs shorter than the minimums may sometimes be used with reduced accuracy...

Страница 2: ...onfigurations Flow Flow Flow 14 5 Flow Flow Flow 10 5 10 5 24 5 10 5 24 5 Figure 2 Piping configuration and transducer positioning The system will provide repeatable measurements on piping systems tha...

Страница 3: ...ent thumbscrew and slide the transducer along the scale to set the distance between the them The scale shows the distance in inches See Figure 3 3 Tighten the position adjustment thumbscrew hand tight...

Страница 4: ...sducer faces and the pipe 7 Route the transducer cables back to the flow meter location avoiding high voltage cable trays and conduits Transducers Small Pipe Transit Time Transducers with Rail Mountin...