2
CRESCENDO
™
REPLACEMENT PARTS/MODEL 175
™
turn. This will snug your jar (bottle) or color
cup assembly in place. To remove, pull down
and rotate jar (or cup) assembly counter
clockwise again.
4) When the trigger of the airbrush is depressed
air is released. As the rigger is drawn back
(while still depressed) fluid is released. The
further the trigger is pulled back, the larger
the volume of pain if sprayed. A fine line or
small dot is achieved by working very close to
the work surface with the trigger drawn back
slightly. A broad pattern is achieved by moving
the airbrush away from the work surface and
pulling the trigger all the way back. The proper
triggering of the airbrush is down for air move-
ment, back for paint flow, and forward to stop
paint flow and up to stop the air.
No.
1 Protective Cap
41-025
2 Spray Regulator
41-033 F 41-034 M 41-035L
3 Head
41-023
4 Tip
41-003F 41-004 M 41-005L
5 Shell-includes needle bearing
41-015
6 Trigger
41-018 Straight
7 Trigger Pad
51-087
8 Back Lever
41-013
9 Handle Adaptor
10 Handle, Quick Disconnect
11 Needle Tube
41-016
12 Tube Shank
41-014
13 Spring, needle tube
41-026
14 Spring screw
41-039
15 Needle chuck
41-017
16 Needle
41-006F 41-007M 41-008L
17 Valve Assembly
50-036 Complete (18, 19, 20, 21,22)
18 Valve Casing
50-013
19 “O” Ring for Plunger
50-0141
}
41-021
20 Plunger-includes “O” ring
50-014
21 Plunger Spring
50-020
22 Valve Screw
50-015
23 Fastblast Adaptor (all plastic)
50-208
24 Gasket
50-0241
25 1/4 oz. Color Cup
50-0482
27 3/4 oz. Jar & Cover
50-0052
28 2 oz. Jar & Cover
50-0053
30 Braided Air Hose
50-2011
†Hose can be used with compressor fitting
or propel valve.
32 Moisture Trap, in line
50-2014 (optional)
33 Recoil Air Hose
50-4011 (optional)
34 Badger Brush to Paasche Air line adaptor
50-090
(optional)
35 PTFE Needle Bearing
41-012
*PTFE Needle Bearing carries a Lifetime Warranty and Free
Replacement at the Factory only.
1
2
3
4
5
6
7
8
9
10
15
14
13
12
11
17
16
19
18
20
22
21
23
24
25
27
28
30†
32
33
34
*35
