Badfish MONARCH, Руководство пользователя

Страница: 7 / 9

1) Open your water bottle holder and lay it flat on the board.
2) Place any size water bottle in the middle of the holder.
3) Pull the long end of the neoprene up and over the bottle and hold it
under tension.
4) Pull the second side of the holder and secure it to the neoprene.
5)
Your water bottle holder is set for the day.
You can pull the bottle
in and out without re-adjusting the velcro.
Re-fold the water bottle holder to the original position when your
done paddling.
6) Your water bottle holder can be removed from the board. Pull the
two tabs up on the top and bottom of holder.
7) Remove and replace if needed.
STAY HYDRATED
USING YOUR WATER
BOTTLE HOLDER
1) To anchor your leash to the board open the velcro tabs on the
end of the leash. Insert the leash through the d-ring located on
the tail of your board.
2) Double back the velcro and flip the additional tabs closed.
3) Give it a good solid pull and make sure it’s on tight.
THE BADFISH ANKLE LEASH
Perfect for paddling in the flatwater and the ocean with a wide neoprene and Velcro ankle cuff
and a coil leash to reduce drag. This leash is intended for flat water and ocean paddling.
THIS LEASH IS NOT SUITABLE
FOR RIVER USE
11’ ANKLE LEASH
1a
3
1 2 3
4a 4b 5
6 7a 7b
1b
2