Bad Boy Q0378, Руководство оператора

Страница: 6 / 22

6
2-2 Continued...
2-3 PTO Assembly Installation
Insert the PTO arm mount rod P#(B0505) on the PTO
assembly P#(A1111) into the mounting slots on the right
frame mount assembly P#(A1023), as shown in Figure
2-3. You will secure the PTO assembly in Section 2-4,
after the belt has been installed.
2-3 Continued...
2-4 Belt Installation/Removal and
Adjustment
Remove (3) 1/4”-20 x ½” P#(K0353) HHSTS from the
belt guard located on the bottom of the PTO assembly
as shown in Figure 2-4a.
Figure 2-2a
Figure 2-2b
Right Frame
Mount Assy.
Figure 2-3
Figure 2-4a
Rear
Bumper
(4) 5/16”-18 x 3/4” Carriage Bolts
(4) 5/16”-18 Flange Nuts
(2) 3/8”-16 x 3/4” HHCS
(2) 3/8”-16 Flange Nuts
Clamp
Bracket
Right Frame
Mount Assy.
PTO Arm Mount Rod PTO Assembly
Remove (3) Screws To
Remove Belt Guard