Bad Boy 4035H 2021 Скачать руководство пользователя

Страница: 83 / 128

BAD BOY TRACTOR

CONTROL LEVER

1. This control lever can be used to

lower and lift an implement freely.

2. Pulling the lever back lifts the im-

plement while pushing it forward

lowers the implement.

(1) Position Control Lever

(A) Lowering

(B) Lifting

CAUTION

•

To avoid a personal injury, use

the control lever when attach-

ing/detaching the implement.

• If the safety frame is incorrectly in-

stalled, it can lead to a severe ac-

cident during a rollover accident.

• Make sure to install the bolts, pins

and nuts properly to set the safety

frame upright securely.

• To fold the safety frame

- The safety frame is heavy. Have

others help you with folding or un-

folding the frame.

- The safety frame may fold abruptly

by its weight. Make sure no injury

is occurred by dropping frame.

- While the safety frame is folded,

do not wear the seat belt.

- When the safety frame is unfold-

ed back and work is done, set the

frame upright immediately before

starting to drive.

4025h_4035h.indb 14

2020-09-18 오후 6:23:17

Содержание 4035H 2021

































































































































Результаты поиска

Содержание 4035H 2021

Отзывы:

Похожие инструкции для 4035H 2021

Бренды по названию

Популярные бренды

Bad Boy 4035H 2021, Руководство оператора

Результаты поиска

Содержание 4035H 2021

Отзывы:

Похожие инструкции для 4035H 2021

Бренды по названию

Популярные бренды