Bad Boy 4025H 2021 Скачать руководство пользователя страница 104

Страница: 104 / 128

MAINTENANCE

1. To drain coolant, open the radiator

cap and drain plug and drain cool-

ant completely from the radiator.

2. Flush the radiator until clean water

is drained.

3. Add anti-freeze up to the filler

neck of the radiator.

4. Start and operate the engine for 5

minutes after filling the reservoir

tank with coolant up to the “FULL”

level. Stop the engine and check

if the coolant level is between the

“FULL” and “LOW” marks. If not,

add some coolant as needed.

REPLACEMENT PROCEDURE

ANTI-FREEZE

The anti-freeze is lowering the freez-

ing temperature of water. The tractor

is filled with appropriate genuine an

ti-freeze at factory.

(1) Anti-freeze reservoir tank

(A) FULL

(B) LOW

CHECKING AND CHANGING COOLANT

CHECKING

Open the hood and check if the cool-

ant level in the reservoir tank is be-

tween the "FULL" and "LOW" marks.

Add coolant through the filler if nec

essary.

(1) Coolant reservoir tank

(A) FULL

(B) LOW

4025h_4035h.indb 9

2020-09-18 오후 6:23:23

Содержание 4025H 2021

































































































































Результаты поиска

Содержание 4025H 2021

Отзывы:

Бренды по названию

Популярные бренды

Bad Boy 4025H 2021, Руководство оператора

Результаты поиска

Содержание 4025H 2021

Отзывы:

Бренды по названию

Популярные бренды