Bad Boy 1022H Скачать руководство пользователя страница 94

Страница: 94 / 148

BAD BOY TRACTOR

STARTING OFF, SHIFTING AND DRIVING

STOPPING AND PARKING

▶

STARTING OFF

1. Lift an implement.
2. Place the main shift lever, range shift

lever and shuttle shift lever into the

desired positions.

3. Depress the brake pedal to release

the parking brake.

•

The driving speed in the reverse

direction is almost the same to

the speed in the forward direc-

tion. Make sure to check the sur-

roundings carefully when driv-

ing backward.

•

Especially, never drive back-

wards with the range shift le-

ver in the position H. The driving

speed becomes faster and it can

cause an accident.

WARNING

•

After parking, make sure to ap-

ply the parking brake.

•

Avoid parking on a slope if pos-

sible. If it is absolutely neces-

sary to park on a slope, chock

the rear wheels.

WARNING

1. Operate the throttle lever to set the

engine at a low speed.

2. Release the forward driving (HST

type) and accelerator (mechanical)

pedals slowly. Depress the brake

pedals for abrupt braking.

3. When the vehicle is completely

stopped, set the shift lever in the neu

tral position.

4. Apply the parking brake.
5. If an implement is attached to the ve-

hicle, lower it.

6. Remove the key from the switch af-

ter parking vehicle.

BB1022H.indb 12

2021-06-28 오후 5:53:25

Содержание 1022H





















































































































































Результаты поиска

Содержание 1022H

Отзывы:

Бренды по названию

Популярные бренды

Bad Boy 1022H, Руководство оператора

Результаты поиска

Содержание 1022H

Отзывы:

Бренды по названию

Популярные бренды