Bad Boy 1022H Скачать руководство пользователя страница 29

Страница: 29 / 148

FOR YOUR SAFETY

㬿⟎㩆#⳺ᅪⰮ

Good Main-

tenance!

Maintenance periodically;

•

After using tractor, visit your

local dealer for maintenance,

such as oil change and filters.

- Contact the local dealer to

discard the parts (battery,

etc.) or waste materials.

If this instruction is ignored,

there is a risk of accident due to

poor maintenance.

WARNING

OTHER

ᄆⵚዲ⺪

Don't modify!

Do not adjust or repair following

components. Consult your local

BRANSON dealer for these re-

pair;

•

Injection capacity and tim-

ing of the engine fuel injection

pump.

•

Correction and repair of hy-

draulic system (safety valve,

hydraulic pump, brake valve,

PST cylinder, SCV valve).

There is a risk of accident or in-

jury or machinery breakdown.

Remember it may cause the

warranty cancellation.

If this instruction is ignored,

consult your local BRANSON

dealer for those repair and ad-

justment.

WARNING

Do not modify the tractor;

•

Use only the genuine parts or

other approved parts. Do not

modify the tractor.

If this instruction is ignored,

there is a risk of accident or in-

jury or machinery breakdown.

Remember it may cause the

warranty cancellation.

CAUTION

BB1022H.indb 23

2021-06-28 오후 5:53:16

Содержание 1022H





















































































































































Результаты поиска

Содержание 1022H

Отзывы:

Бренды по названию

Популярные бренды

Bad Boy 1022H, Руководство оператора

Результаты поиска

Содержание 1022H

Отзывы:

Бренды по названию

Популярные бренды