Bad Boy 1022H Скачать руководство пользователя страница 115

Страница: 115 / 148

MAINTENANCE

OPENING COVERS

INSPECTION ITEMS

1. Slide the hook to the side. Then, the

hood opens with a clicking sound.

2. Lift the hood with hands. Then, the

hood is automatically opened and

fixed by its damper.

To prevent any possible failure, some

items should be checked daily.
Make sure to perform inspection before

driving.

▶

Inspection items

Inspect each part in the following order:

①

Check the items that were faulty

yesterday.

②

Go around the tractor and check:

- Lamps for proper illumination and

damage

- Tires for inflation pressure, crack,

damage and wear

- Rotating parts for loose bolts and

nuts

- Transmission fluid level
- Implement attachment status

③

Open the hood and check:

  - Engine oil level
  - Coolant level
  - Fan belt for looseness and damage

④

Sit on the driver’s seat, turn the

main switch to the “ON” position and

check:

  - Fuel gauge for proper operation
  - Fuel level
  -   Engine oi l and charge warning

lamps for blinking operation

  - Turn signal lamp
  - Horn operation
  - Brake pedal free play

⑤

Start the engine, drive the tractor

slowly and check:

  - Emission color
  - Brake pedal operation
  - One brake pedal operation
  -   Steering wheel for heaviness and

vibration

- Coolant gauge operation
- Hydraul i c operat ion of 3-point link

(1) Hood Lock Lever

BB1022H.indb 5

2021-06-28 오후 5:53:28

Содержание 1022H





















































































































































Результаты поиска

Содержание 1022H

Отзывы:

Бренды по названию

Популярные бренды

Bad Boy 1022H, Руководство оператора

Результаты поиска

Содержание 1022H

Отзывы:

Бренды по названию

Популярные бренды