TF2089904-KK-00 Eng Page 16 of 22 20150422 V.1
4. Assemble the Legs (2) to Stand Ring (3) by using
3pcs M6 x 12 bolts (A) and 3pcs M6 nuts (B). Install the
Small T-Support Legs (4) and (5) onto the
Stand Ring (3) with 3pcs M6 x 12 bolts (A) and 3pcs
M6 nuts (B).
5. Unscrew the pre-assembled nut from the threaded pin
of the Burner (9). Then insert the threaded pin at the
bottom of burner into the center hole of burner
supporting bar. Make sure the alignment pin on the
burner seat in the notch on the edge of burner
supporting bar. Align the holes on Heat Shield (7) with
threaded pin and alignment pin of Burner (9) and hole
on burner supporting bar, then fix the Heat Shield (7)
outside the burner supporting bar and tighten with hex
nut (on the threaded pin) onto the bolt of Burner (9).
6. Align Timer Control Box (8) to the timer box supporting
bar on Small T-Support Leg (5) and fix it with
2pcs M6 x 12 bolts (A) by going through the supporting
bar and then to the timer box.
Timer box
supporting bar
A
3
B
5
Burner Supporting Bar
7
Threaded Pin
8
Timer Box Support Bar (5)
2
9
