Backyard Products 16572-A, Инструкция по сборке

Страница: 30 / 64

3/8 x 48 x 96"
(1 x 121,9 x 243,8 cm)
3/8 x 48 x 96"
(1 x 121,9 x 243,8 cm)
3/8 x 42 x 83"
(1 x 106,7 x 210,9 cm)
3/8 x 42 x 83"
(1 x 106,7 x 210,9 cm)
x1 x1 x1 x1
Fig. E
Primed
side up
30
PARTS REQUIRED:
SIDE WALL PANELS
x12
1-1/2" (3,2 cm)
DOOR
x3
2" (5,1 cm)
Repeat steps 1, 2 and 3 to install panels on the opposite side.
4
Place 48 x 96" panel onto side wall flush with front wall stud and flush to bottom front
wall sheathing, with 1" overhang, as shown. Secure panel with (2) 2" nails in the corners
(Fig. A) . Ensure the measurement between the panel edges are the same along the
entire length (Fig. B) . Angle nails into floor frame (Fig. C) .
Place 42 x 83" panel onto side wall flush with bottom of 48 x 96" panel, as shown. Secure panel with 2" nails
in three corners (Fig. E) . Ensure the measurement between the panel edges are the same along the entire
length (Fig. B) . Angle nails into floor frame (Fig. C) .
Move to the top of panel. Using the long edge of the panel as a lever move the panel
side-to-side until top of panel is flush with front wall stud. Secure upper corner with (1)
1-1/2" nail into rafter
(Fig. D)
. Ensure 1" panel overhang at bottom of panel
(Fig. D)
.
2
1
3
Fig. A
Fig. C
Fig. B
Fig. C
Fig. B
Fig. D
2" Nails
1-1/2" Nails
1-1/2" Nail
2" Nail
Flush
Flush
Flush
48"
(121,9 cm)
1"
(2,5 cm)
1"
(2,5 cm)
42"
(106,7 cm)
Primed
side up
BEGIN
Flush
Flush
Same
Measurement
Same
Measurement
Install all wall panels with the primed side facing out.