32
SWING BEAM
SWING HANGERS
Lock Nut
Cap
1-3/8"
Washer
2 Threads MIN.
Use a socket
wrench to tighten
Lock Nut securely
against washer.
Place Cap on threads
after tightening
Swing Hanger Bolt must protrude at least
TWO Threads beyond Lock Nut.
IMPORTANT!
Lock Nut
1-3/8" Washer
HOLD position of
Swing Hanger while
tightening Lock Nut.
Final position of each Spring Clip is
perpendicular to swing beam.
Swing Beam
IMPORTANT!
x1
3-3/8 x 5-3/ x 95"
2502-CC
SWING BEAM
SWING HANGERS - INSTALL
You may need to tap with hammer to get though holes.
Swing Hanger Bolt
Flat Washer
Spring Clip
Swing Hanger
Swing Hanger
Swing Beam
Flat Washer
Final position of each Spring Clip is
perpendicular to swing beam.
IMPORTANT!
2631
x6