Step 1:
Unfasten the storage straps around the canopy. To open the umbrella,
squeeze the glide handle (7) and grip to slide up or down to achieve desired
canopy angle. Release the grip to lock into place. To fully open the canopy,
turn the crank handle (Q) until the canopy reaches proper tension. If the crank
becomes too hard to crank, check to see it the rope has come off the pulley.
If you continue to turn the crank, the rope could break.
Step 3:
Fill up each blow molded base (A & B) with
sand water
and cover with cap (M).
Place the pole support cap (L) onto the holder pole (F) and lay
everything on top of the blow molded base (B).
6
E
Umbrella Operation
M
A
Crank (Q)
Grip
Close
Open
Glide Handle (7)
Canopy Open
L
B
Assembly (continued)
