7
3. Attach the leg connector bracket to the firepit base by using four 1/4"x55 mm bolts and
Ø6.5x1.0 mm washers as shown in Figure 3. Guide the bolts through the holes in the leg
connector bracket, into the pre-drilled holes in the firepit base. Hand tighten only 2-3 turns.
Figure 3
4. Attach the firepit base to the table top by using four 1/4"x20 mm bolts and Ø20xØ6.5x2.0
mm washers as shown in Figure 4. Hand tighten only 2-3 turns.
Figure 4
5. Attach a leg to the tabletop by using two 1/4"x20 mm bolts and Ø20xØ6.5x2.0 mm washers
as shown in Figure 5. Hand tighten only 2-3 turns. Attach a leg to the leg connector bracket by
using two 1/4"x20 mm bolts and Ø6.5x1.0 mm washers as shown in Figure 4. Hand tighten
only 2-3 turns. Repeat this process for the other three legs.
Figure 5
