SKU 272-0095/FC-30-MN
07
© 2018 Jack-Post Corporation 09/18
2" CARRIAGE BOLT (4)
GLUE
WOODEN CLEAT
STEP 3
Insert four 2" carriage bolts into counterbored holes in cleat.
STEP 3A
Before nailing cleat, cover the mating surface of the cleat with a coat of white glue.
STEP 3B
When attaching cleat, nails driven straight in are easily pulled out, but when angled, reinforce one another.
2" CARRIAGE BOLT
WOODEN CLEAT
NAIL
TABLE TOP
STEP 4
Nail cleat to top boards,
“
trapping
”
head of carriage bolts between cleat and top board, as shown above. Position edge of cleat
on marked line as shown below.
STEP 5
Repeat STEPS 2 - 4 at other end of table top.
POSITION EDGE OF
CLEAT ON MARKED LINE
WOODEN CLEAT
NAIL
CARRIAGE BOLT
MARKED LINE
TABLE
TOP
STEP 6
Center remaining 28" x 2" x 4" cleat between end cleats. Nail to table top boards after gluing. On 4
'
table there is no center cleat.
STEP 7
Attach angle brackets to end cleats and secure with 1/4" hex nuts, as shown.
ANGLE BRACKET (2)
1/4" HEX NUT (8)
2" CARRIAGE BOLT (8)
1/4" HEX NUT
