9
8. Pour ALL the provided media (fire ice or lava rock) into the burner pan. The burner MUST
be completely covered to ensure the appliance functions properly and safely. Remove any
lava rocks or fire ice on top of the ignition well. See Figure 7.
Figure 7
9. Open the door and place the LP tank in the bottom frame. Connect the regulator as shown
in Figure 8. Turn the black handle clockwise to tighten. Turn the handle counterclockwise to
remove. The hose must point down. Open the control door and check that the valve is turned
all the way clockwise to the “OFF” position. Open the tank valve. Apply a solution of soapy
water to the tank-regulator connection and to the valve-hose connection to check for leaks. If
soap bubbles continue to form, the connection has a leak. If a leak is found, close the tank
valve and tighten all connections.
NEVER USE A FLAME TO CHECK FOR LEAKS.
Figure 8
10. Tighten the threaded knobs found on the tank tray (Figure 9) so that the LP tank cannot
move from side to side. Do not remove the plastic cap from the end of the threaded section.
Figure 9
Checking the tank-regulator for leaks
