CAUTION:
DO NOT INSERT END OF UMBRELLA
POLE INTO THE GROUND.
The solar umbrella is
designed to be used with an umbrella stand
(not supplied).
Attach Solar Battery Compartment Assembly
1.
(SEE FIGURE 1)
Position battery compartment (A)
at top of umbrella assembly (B).
2. Insert connector plug attached to umbrella into
receptacle located on battery compartment.
3. Insert battery compartment stem into top of
umbrella. Turn battery compartment clockwise
to lock and secure.
PARTS LIST
PART #
DESCRIPTION
QUANTITY
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
A
Solar Panel
1
B
Solar Umbrella Assembly
1
C
Umbrella Pole
1
1
ASSEMBLY INSTRUCTIONS
Figure 1
B
A
Mounting
Stem
Attach Umbrella to Umbrella pole
1.
(SEE FIGURE 2)
Carefully thread umbrella
pole (C) into solar umbrella assembly (B).
Turn umbrella pole (C) clockwise to tighten.
2. Place the umbrella upright.
How to Turn Solar Lights On
1.
(SEE FIGURE 3)
Once the batteries are
fully charged, place the power switch to
the on "l" position.
2. Refer to section entitled "Charging
Rechargeable Batteries".
OPERATING SOLAR UMBRELLA
NOTICE:
Set switch to off “O” position
when solar lights are not in use.
Battery Recycling
Please dispose of used batteries properly. Consult your local telephone listings for
a battery recycling center near your area.
Do not dispose Ni-MH
batteries in household waste!
Do not throw Ni-MH batteries
into water!
Protect Ni-MH batteries
against heat and fire due to risk
of explosion!
Recycling
4
Figure 2
Umbrella
Pole
Solar
Umbrella
Assembly
Figure 3
I
0
On/Off
Switch
B
C
