5
removed. If the clear gasket becomes dislodged from the blender base or lid,
replace by setting the gasket flat onto the circular slot inside the perimeter of the
blade base (blade side up) or the lid, beveled edge out. Holding the blade base
(blade side up) or lid with both hands, use your thumbs to lightly push the gasket
down into the circular slot of the base perimeter until it is firmly in place. Screw
the mug onto the blade base or lid to ensure the gasket is seated properly.
5. Pulse the mixture 2 or 3 times by turning the dial to “PULSE.”
6. Turn the dial on the motor base to “LOW” for 15 seconds to begin blending.
7. Turn the dial to “HIGH” until the ingredients are completely mixed. Note: After
running the motor continuously for ninety seconds, wait at least three minutes
before running the motor again. Do not blend for longer than 90 seconds at a
time.
•
To make a thicker smoothie, add more frozen ingredients.
•
To make a thinner smoothie, add more liquid ingredients.
TO GO:
1. Unlock the mug from the motor base and then flip the mug over.
2. Turn the blade base counter-clockwise and remove it from the mug.
3. Place the mug lid on the mug and turn clockwise to tighten. Enjoy!
Note: Do not store contents inside of the mug with the lid on. Pressure may build
up inside of the mug causing the contents to expand rapidly when the cover is
removed.
C
LEANING
Y
OUR
B
LENDER
E
XPRESS
™
1. Switch to “OFF” and unplug from the electrical outlet.
2. Wipe the motor base with a damp cloth or sponge. To remove stubborn spots,
use a mild, non-abrasive cleanser.
3. Carefully wash all parts except for the motor base in warm, soapy water, rinse
and dry thoroughly. Do not wash parts in the dishwasher. Note: If the lid or
blade base is difficult to remove from the mug, rinse or soak the mug and the
blade base or lid in warm, soapy water. Then, using a damp cloth to grip the lid
or blade base, unscrew from the mug by turning the lid or blade base counter-
clockwise.
