Bachmann IPC312, Руководство по эксплуатации, Страница: 7 / 48

D-BA-0000303.5.2
Operating instructions Safety instructions
V05 / September 07, 2010 OI-3
2 Safety instructions
The following basic safety instructions are intended to avoid personal injury and
material damage. The operator must ensure that the basic safety instructions are
adhered to.
Make sure that system and operating staff and any persons that work on the
device under their own responsibility have completely read and understood the
operating instructions.
In the event that something is unclear or if additional information is required, please
contact your technical service representative at Bachmann electronic GmbH.
2.1 General
Never install or operate damaged products. Please report any defects immediately
to the carrier.
Unapproved removal of required coverings, improper use, incorrect installation or
operation may result in severe personal injury or material damage.
Unauthorized opening and incorrect repairs may result in defective devices or
cause malfunctions that may cause danger to the user in connection with
connected peripheral devices.
2.2 Target group
All work for the installation, startup, troubleshooting and maintenance must be
performed by
qualified technicians or Bachmann electronic GmbH authorized
personnel (IEC 60364 or CENELEC HD 384 or DIN VDE 0100 and IEC 60664 or
DIN VDE 0110 and national accident prevention regulations must be adhered to).
A qualified technician in the sense of these basic safety instructions is a person
who is familiar with the setup, installation, startup and operation of the product and
who has the proper qualifications to perform these tasks.
The user of the device must have read the operating instructions and be familiar
with all functions of the installed software that he has access to.
All work in the remaining areas of transport, storage, operation and waste disposal
must be performed by persons who have been trained accordingly.