Bachmann IPC312, Руководство по эксплуатации

Страница: 33 / 48

D-BA-0000306.14.2
Operating instructions Getting started
V05 / September 07, 2010 OI-29
5 Getting started
The device is delivered with a pre-installed customer-specific software (BIOS,
operating system and all necessary drivers etc.). When installing additional
software please refer to the manual provided by the software manufacturer.
Requirements
Procedure:
1. Check the installation.
2. Connecting the necessary cables / devices (e.g. Ethernet, keyboard).
3. Connecting supply voltage.
Starting
The device does not have its own power switch.
Procedure:
1. Switch on the system.
– or –
2. Connected the device to the supply voltage.
 The device will start up in a predefined state, which means the pre-installed
application will start up.
Powering down
Procedure:
1. Shut down the device correctly.
Otherwise can this lead to data loss!
Switch off the system
2. Switch off the system.
Disconnected parts of the system must be protected against unintentional
restart.
– or –
Switch off the device
Requirements
If the device is part of a system, all parts of the system must first be
switched off and the system must be disconnected.
3. Disconnect the device from the supply voltage.