Contact
Function
Pin 1
Common terminal (COM)
Pin 2
Normally closed contact
Pin 3
Normally open contact
Pin 4
Potential-free digital input contact
Pin 5
Pin 6
Not assigned
Output: Pin 1, Pin 2 and Pin 3 serve as changeover contacts. Pin 1
is the common terminal (COM), Pin 2 is the normally closed con-
tact and Pin 3 is the normally open contact. Pin 1 is connected to
Pin 2 in the switched-off state. When the relay switches, Pin 1 is
connected to the normally open contact Pin 3.
The GPIO port (RJ-12) is supported on the PDU in
software version V2.01 and higher.
1.5 Scope of delivery
Fig. 12: Scope of delivery
The scope of delivery includes:
n
PDU (Fig. 12/
Ⓐ
)
n
Two plug-in brackets for mounting the PDU via the back
(Fig. 12/
Ⓑ
)
n
Two plug-in brackets for mounting the PDU via the sides
(Fig. 12/
Ⓒ
)
n
Two mounting brackets (Fig. 12/
Ⓓ
)
n
Two sets of plug interlocks (C13/C19) (Fig. 12/
Ⓔ
)
n
Mounting and installation instructions
n
Safety information
PDU
Overview
Scope of delivery
01.03.2017
BlueNet PDU BN3000/3500/5000/7000/7500
12
