Bacharach PUR-CHEK, Руководство по эксплуатации и обслуживанию

Страница: 12 / 22

Pur•Chek
™
Instruction 2100-9000 8
4 Operation
4.1 Battery Installation
The Pur•Chek™ has, as an option, an internal rechargeable battery. If your Pur•Chek™ is equipped with the
optional rechargeable battery, you must fi rst install and charge the battery prior to use. NOTE: The Pur•Chek™
can be operated with or without the battery using the supplied AC adapter. Refer to Section 2.2 for instructions.
To install the optional battery, remove the battery cover from the back of the unit by unscrewing the two Phillips
head screws as shown below.
OR OPENED CONTAINERS OF GASOLINE.
at least 18 inches above to floor.
Use this equipment in locations with mechanical ventilation that
provides at leat four air changes per hour or locate the equipment
D
A
TE
C
ODE
:
WARNING-TO REDUCE THE RISK OF FIRE:
DO NOT USE THIS EQUIPMENT IN THE VICINITY OF SPILLED
LISTED 6P03
Design Pressure: 300 psig
Refrigerant Type: R-12, R-134a
R
Miscellaneous Refrigerant Equipment
12 VDC, 1A; Design Pressure: 300 psig
Battery Cover Screws
Inside the Pur•Chek™ battery compartment, locate the male plug on the left side. Slide the nylon strap around
the battery. Insert the battery module into the compartment aligning the female connector of the battery module
with the male plug in the battery compartment. Replace the cover and snug the screws.
NOTE: Charge the battery for a minimum of 4 hours with the supplied charger prior to fi rst use.
To remove the battery, simply tug gently on the nylon strap, being sure to pull straight up, until the battery is
dislodged. The battery may be charged either inside of the unit or independent of the unit.