Manual Part Number:
5-06-7000-80-0
Manual File:
012476 Rev. A
Page 2-15
2
L
EGEND
ID
TM
O
PERATION
2.1 First Use
The
Legend ID
™ has a built in Lithium Ion battery. Prior to first use
charge the battery for
a minimum of 2 hours
with the included AC Power Supply
.
The analyzer will function and
charge the battery when the AC Power Supply is connected.
2.2 Power On the Analyzer
For use with an SAE J2843 or J3030 certified AC Service Machine, connect one end of the
provided USB cable to the USB port on the back of the analyzer and connect the other end
of the USB cable to the AC Service Machine.
NOTE:
If the unit is used as an independent device the USB cable should not be
connected.
Press the upper right, ‘POWER’ button and the splash screen shown in
(Figure 1)
will appear.
Press ‘Next’ and the device will warm up as shown in
(Figure 2).
Warm up will take
approximately 30 seconds.
Figure 1
Figure 2
