TrilliumSeries™ Adiabatic
Cooler - TRF Rigging & Assembly Instructions
–
Warnings and Cautions
Page | 4
1. Warnings and Cautions
Safety Precautions
DANGER
•
DANGER:
All electrical, mechanical, and rotating machinery are potential hazards, particularly for those not familiar with
their design, construction, and operation. Accordingly, use appropriate lockout procedures. Do not perform any service on
or near the fans, motors, and drives, without first ensuring that the fans are disconnected, locked out, and tagged out.
Adequate safeguards (including the use of protective enclosures where necessary) should be taken with this equipment
both to safeguard the public from injury and to prevent damage to the equipment, its associated system, and the
premises.
•
DANGER:
Failure to use designated lifting points can result in a dropped load causing severe injury, death, and/or
property damage. Lifts must be performed by qualified riggers following BAC published Rigging Instructions and generally
accepted lifting practices. The use of supplemental safety slings may also be required if the lift circumstances warrant its
use, as determined by the rigging contractor.
•
DANGER
: Incoming power lines to the disconnect switch remain energized. To prevent electrocution, which is likely to
cause severe injury or death take proper electrical precautions when working near energized equipment.
WARNING
•
WARNING:
To prevent severe injury or death
the top horizontal surface of the unit is not intended to be used as a walking
surface or working platform. If access to the top of the unit is desired, the purchaser/end-user is cautioned to use
appropriate means complying with applicable safety standards of governmental authorities.
•
WARNING:
To prevent severe injury, death and/or property damage the unit must be properly anchored before operation
begins.