20
19
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
OTHER OTRO
OTHER OTRO
MUSIC/VIBRATION UNIT
UNIDAD DE MÚSICA/VIBRACIÓN
17)
•
To use the vibration function:
To activate
the vibration function, slide the vibration
switch to the ON position.
•
Para usar la función de vibración:
Para
activar la función de vibración, deslice el
interruptor de vibración a la posición de
encendido (ON).
18)
•
To use the music function:
This unit features
different melodies. Slide the music switch
to LOW or HIGH to activate the music and
select the volume.
•
Para usar la función de música:
Esta unidad
cuenta con diversas melodías. Deslice el
interruptor de música a BAJO (LOW) o ALTO
(HIGH) para activar la música y seleccione el
volumen.
Vibration ON/OFF switch
Interruptor de encendido/apagado (ON/OFF)
Music/volume switch
Interruptor de Música/Volumen
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that may cause undesired
operation.
WARNING:
Changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.