BABYSTYLE EGG, Инструкция по эксплуатации

Страница: 16 / 17

31
Notes:
30
Trouble Shooting.
Chassis will not fold after rotating grip backwards.
Ensure the handle is in the lowest ‘locked’ position and that the centre section of the handle is fully
rotated backwards.
Make sure no downward or upward force is applied to the handle when rotating, rotate fully before
lowering the handle.
Ensure the chassis if free of the seat unit, carrycot or any adaptors.
Bumper bar will not insert.
Ensure the button below the bumper bar housing is pressed in while inserting the bumper bar.
Front wheels only lock in forwards position.
Ensure the wheels are fitted to the Right and Left (R and L marked on the top of the wheel units) from
the perspective of standing facing the front of the stroller.
Front wheels will not swivel freely.
Remove front wheels clean axle stubs lubricate and replace.
Removing car seat from adaptors is stiff.
Check the adaptors are clean and free from burrs or damage, check the car seat opening where the
adaptors insert is clean and not damaged.
Spray furniture polish on to the adaptor parts that insert into the car seat or apply a little vaseline and
wipe away excess. Always ensure the car seat is locked in position before use.
Tandem Carrycot in lower position difficult to fit.
Angle the foot end of the carrycot down slightly as you lower forwards onto and into the adaptors. If
the carrycot is angled back towards the head end it may be obstructed by plastic parts on the chassis.