BABYSTYLE EGG, Инструкция по эксплуатации

Страница: 7 / 17

13
8. Using the 5 point safety harness.
Fit together the two connectors on the harness
straps and push firmly into the buckle housing until
they click together.
Important: Ensure they are fully engaged before
use.
As your child grows, the height of the shoulder
straps can be altered. Reach inside the seat back
rest and locate the buckles. Thread through the
opening in the seat back and seat cover, adjust to
the correct height position and re-thread back
through the seat fabric and seat back rest. Ensure
the buckles are fitted correctly before use.
Adjust the straps to suit the child using the sliders
on the harness.
To release the connectors depress the grey button
on the buckle housing, the two connectors will
release from the main housing.
WARNING: To avoid serious injury always use a
5 point safety harness.
Important: Always ensure the parking brake is
engaged when placing and removing children from
the vehicle.
9. Removing the seat unit from the chassis.
Depress the grey buttons on the side of the seat unit
and lift the seat upwards from the chassis.
Important: Always remove your child from the seat
unit before removing the seat unit from the chassis.
12
5. Adjusting the calf support.
Pull the calf support upwards to raise.
Depress both grey buttons at the side of the
footrest to lower into the desired position.
Note: The calf support has 4 positions.
6. Fitting/removing the seat unit hood.
Attach and fasten the zip; push the plastic clips
firmly onto the seat unit frame then close the clips.
To remove; unfasten the clips from the seat unit
frame and open the zip.
7. Fitting the seat unit apron.
Slide the bottom of the apron over the calf support.
Pull upwards into place and fold the apron flap over
the bumper bar. Secure using the press studs on the
apron flap.