BabySense V35TX, Руководство пользователя

Страница: 13 / 18

4.13 Warning Alert Se�ng
This se�ng controls the volume of an audio “beep” sound aler�ng when the Parent Unit is low on ba�ery
or out of range (no connec�on to Baby Unit). You can set a lower volume level during the night and higher
level during the day.
• Press the
MENU/OK
bu�on
(6)
on your Parent Unit and the menu screen will pop up.
• Press the
LEFT
bu�on
(9)
or
RIGHT
bu�on
(7)
un�l the
ALERT
icon is highlighted in red.
• Then press the
MENU/OK
bu�on
(6)
and a secondary menu with brightness level op�ons will pop up.
• Press the
LEFT
bu�on
(9)
or
RIGHT
bu�on
(7)
to select the desired alert volume:
MUTE, LOW, MED or
HIGH
. Press the
MENU/OK
bu�on
(6)
to confirm.
• Press the
EXIT
bu�on
(8)
to exit the menu.
NOTE:
Selec�ng
MUTE
op�on will turn all alerts OFF. In case of low ba�ery or out of range, there will be
no acous�c no�fica�on heard.
4.14 Night Light
This monitor features a night light integrated into the Baby Unit
(20)
, allowing you to remotely ac�vate a
comfor�ng glow to baby’s room.
• Press the
EXIT
bu�on
(8)
to ac�vate the Night Light on the Baby Unit.
• Press the
EXIT
bu�on
(8)
again to deac�vate it.
NOTE:
The Night Light status icon (ON or OFF) will be displayed on top of the LCD screen.
NO TE:
Night Light feature can also be ac�vated manually on the Baby Unit. Briefly press the
PAIR
bu�on
(25)
in the back of the Baby Unit. Press again to deac�vate.
5 Using the Wide Angle Lens
The supplied Wide Angle Lens provides be�er control over the viewing angle. It captures a wider viewing
area, allowing you to see more around the Baby Unit. Best for ac�ve babies and toddlers.
To use the lens, just screw it onto the Baby Unit as illustrated below:
13
Normal View – Baby Unit with no Lens Wide Angle View – Baby Unit with the Lens
NOTE:
Always ensure the lens is screwed �ghtly onto the Baby Unit.
Screw the lens onto
the Baby Unit