4.3 Scan Mode - Automa�c switching between the paired Baby Units (Cameras)
You can set the
SCAN
(loop) mode and each paired Baby Unit will be displayed on the screen for 10
seconds and then the screen will automa�cally change to the next paired Baby Unit.
• Press the
MENU/OK
bu�on
(6)
on your Parent Unit and the menu screen will pop up.
• Press the
LEFT
bu�on
(9)
or
RIGHT
bu�on
(7)
un�l the CAM icon is highlighted in red.
• Then press the
MENU/OK
bu�on
(6)
and a secondary menu with camera op�ons will pop up.
• Press the
LEFT
bu�on
(9)
or
RIGHT
bu�on
(7)
un�l the Camera Loop icon (last op�on) is highlighted in
red and press the
MENU/OK
bu�on
(6)
bu�on to confirm.
• Now the
SCAN
mode is ac�vated and the monitor will automa�cally switch between the paired Baby
Units with an interval of 10 seconds.
• On the top of the LCD display you will see the Loop icon.
• Press the
EXIT
bu�on
(8)
to exit the menu.
• To deac�vate this mode, follow the steps explained in sec�on 4.2 and select any of the paired Baby
Units you want to connect to.
4.4 Dele�ng the Baby Unit (Camera)
Press the
MENU/OK
bu�on
(6)
on your Parent Unit and the menu screen will pop up.
• Press the
LEFT
bu�on
(9)
or
RIGHT
bu�on
(7)
un�l the
PAIR
icon is highlighted in red.
• Then press the
MENU/OK
bu�on
(6)
and a secondary menu with camera op�ons will pop up.
• Press the LEFT bu�on
(9)
or
RIGHT
bu�on
(7)
to select the desired Baby Unit to delete and press the
MENU/OK
bu�on
(6)
bu�on.
• The chosen Baby Unit will start blinking. Press and hold the
PAIR
bu�on
(25)
in the back of a Baby Unit
you want to keep.
• The above procedure will automa�cally remove the Baby Unit you want to delete.
The Baby Unit you want to keep will overwrite the posi�on of the Baby Unit you deleted.
• Press the
EXIT
bu�on
(8)
to exit the menu.
4.5 ECO Mode
When using the
ECO
func�on, the sound and video transmission will stop (standby mode) if the Baby Unit
does not register any sound within 30 seconds.
While in standby mode, the LCD screen turns off. Once the Baby Unit registers a sound, louder than the
set sensi�vity level, it will automa�cally start transmi�ng the signal (sound and video) to the Parent Unit
and the LCD screen will turn on.
NOTE:
ECO default se�ng is OFF in the supplied product.
To
change the ECO level, please follow the following instruc�ons:
• Press the
MENU/OK
bu�on
(6)
on your Parent Unit and the menu screen will pop up.
• Press the LEFT bu�on
(9)
or
RIGHT
bu�on
(7)
un�l the
ECO
icon is highlighted in red.
• Then press the
MENU/OK
bu�on
(6)
and a secondary menu with camera op�ons will pop up.
• Press the LEFT bu�on
(9)
or
RIGHT
bu�on
(7)
to select the desired sensi�vity level (
LOW/MED/HIGH
)
and press the
MENU/OK
bu�on
(6)
to confirm.
• On the top of the LCD display you will see the ECO icon.
• Press the
EXIT
bu�on
(8)
to exit the menu.
10
Содержание V35TX
Страница 18: ...Video Baby Monitor By...