13
12
9. Buckle usage
Tighten: Pull the adjusting strap 10 by one
hand until the harness lies flat and is close
against your child’s body.
Caution!
Grasp the both shoulder straps 6 by
one hand(with index finger and middle finger),
and pull the adjusting strap 10 forwards with
another hand slowly, when the hand with
shoulder strap touch with child body then
shop puling the adjusting strap 10, the
strength of shoulder strap is properly.
click
10. Installation in the Vehicle
Push the isofix connector and insert to
both sides of isofix iron rod with click
noisy, FIX status red and green windows
24 shows green, and pull it externally
not to move to be installed successfully.
Press the isofix stretched out button 13
and gently push the child seat toward
the seat back unit it perfectly aligned
with the back of the car.
Warning:
if your car do not has the isofix
connection system, please read the
applicable vehicle instruction book.
Please select the appropriate seat installation
in the car. Install the ISOFIX guide sleeve on
the iron rod of the ISOFIX connection of the
car (some cars are not used)
Press the support leg release button 23,
open the support leg until locked.
Press the isofix stretched out button 13,
and pull the isofix connector to the
longest by hand.
ISOF2X
Caution!
If in doubt, please refer to the vehicle user’s manual.
Caution!
Do not place anything under the child seat support leg.
