15
BABYPHONE HIGH CARE
• Instruction Manual
SETTINGS
Channel NO./
Baby’s Room Temperature
Range Check Icon
Transmit Icon
Night Light VOX Icon
Night Light Icon
Battery Status Indicator
Digital Code
Microphone Sensitivity Bar Graph
Transmitter LCD Screen
TRANSMITTOR
RECEIVER
Channel and
digital code
setting
Output power
setting
Press and hold the mode button
(3)
for
more than 5 seconds ; a beep will sound
once the unit goes into programming
mode. The LCD will show following:
Press and hold the mode button
(10)
for
more than 5 seconds ; a beep will sound
once the unit goes into programming
mode. The LCD will show following:
Use selection button
(2)
to chose the
channel and press the mode button
(3)
to
validate your choice. The LCD will show
following (here CH 2 is selected):
Use selection button
(9)
to select the same
channel as on the transmitter and press
the mode button
(10)
to validate your
choice. The LCD will show following (here
CH 2 is selected):
Use selection button
(2)
to chose the digital
code and press the mode button
(3)
to
validate your choice. The LCD will show
following (here digital code 28 is selected):
Use selection button
(9)
to select the same
digital code as on the transmitter and press
the mode button
(10)
to validate your choice.
The LCD will show following (digital code
28 is selected):
Use selection button
(2)
to chose the
output power output. Hi means high
power while Lo means low power and ELo
means extra low power. Press the mode
button
(3)
to validate your choice.