13
7. If the unit is paired to work with two BU, BU no.1 always has priority. This means
while the unit is listening to signal from BU no. 2, in case BU no. 1 starts
transmitting, the unit will immediately switch listening to BU no.1 until it stops to
transmit, then the unit will switch back listen to BU no. 2.
8. To avoid parent missing attendance to BU no.2, while the unit is listening to signal
from BU no.1, in case BU no.2 starts to transmit, the baby unit no. icon 34 will go
flashing to alert the parent. If parent prefers to listen to BU no. 2, he can short
press the power ON/OFF button 18 and the unit switches listening to BU no. 2.
The baby unit no. icon 34 will become lighted up steady while baby unit no.
icon 33 will go flashing (if baby 1 continues to cry). Further short press of
button 18 will switch back to listen to BU no. 1 again. Under such arrangement, the
parent is able to monitor both babies.
9. Under standby mode, if there are two BU, the unit will alternately scan each BU for
15 sec with the BU no. icons 33 and 34 alternately show up. When either one of
the BU starts to transmit, the unit will immediately listen to that BU until the signal
goes off (or switch listening to signal from BU with higher priority). Short press the
power ON/OFF button 18 to light up the temperature indicator 26 . After 20 sec,
it will go off automatically
10.When the out of range alert function is set to , once this unit is beyond the
communication range of BU for over 30 sec, an out of range alarm will be heard
together with segments of the visual level meter 25 and out of range/transmit
icon 29 flashing to alert the parents. (The alarm sound is independent of
whether the speaker is muted or not). Besides, the temperature indicator 26 will
show - - in case it is lighted up. This alarm will go off only when the PU falls back
within the communication range of BU. In case there are two BU, the out of range
alarm will be provided when the PU is showing the status of that BU which is
beyond the communication range.
N.B. This alarm will also be heard in case the BU is switched off, or its battery has
run down, or its power is cut off, or the pairing is not properly done between the
BU and PU.
BU no. 2 is out of range
BC-63_Manual_05.pdf 13 22/7/14 6:10 pm
Содержание A014201
Страница 1: ...BC 63_Manual_05 pdf 1 22 7 14 6 10 pm...
Страница 18: ...18...