babymoov A014201, Инструкция по эксплуатации

Страница: 16 / 19

16
Problem Possible Causes Solution
BU has no - BU is switched off - Switch on BU
transmission - Mic sensitivity is too low - Adjust mic sensitivity higher
- BU Battery has run down or AC - Replace with new battery or
adapter improperly connected check connection
Always transmitting - Mic sensitivity is too high - Adjust mic sensitivity lower
- BU is set to continuous - Set the unit to become voice
transmission mode activated
Out-of-range alarm - Pairing is not successful - Perform pairing again
always on - BU battery has run down - Replace with new battery or use
AC adapter
- Distance between BU and - Move the BU and PU closer
PU exceeds the operating range together
No Out-of-range - Setting of Out-of-range function
alarm in PU is - Change Setting to
Temperature alarm - The upper and lower temperature - Set the upper and lower
always on limit is set too close to the temperature limit around 5˚C
current reading difference from current reading
Always showing low - Battery has run down - Recharge battery using charger
battery alert stand (PU). Replace with new
battery or use AC adapter (BU)
- Battery pack is damaged - Replace with new battery pack
Battery life is short - Night light is permanently - Switch off night light or set to
switched on VOX operate
- Vibration alert is switched on - Switch off vibration alert
Two BU having same - Pairing is done with both BU - Perform pairing again with BU
BU number shown on set with same BU number set with different BU number
PU
Many static noise - BU is located near other - Remove the electrical
and interference electrical appliances appliances or re-locate
the BU far away from source of
interference
Too short - Many steel structures - Re-locate BU or PU
communication between BU and PU
range - BU battery has run down - Replace with new battery or
use AC adapter
TROUBLE SHOOTING GUIDE
BC-63_Manual_05.pdf 16 22/7/14 6:10 pm