BaBylissPro BAB7880U, Руководство пользователя

Страница: 3 / 9

appliance has been dropped. In the event of damage,
discontinue use immediately and contact the Conair
Customer Care Line (refer to ‘UK After Sales Service’
section for further information).
• Do not use the appliance if the lead is damaged. In the
event of lead damage, discontinue use immediately.
If the lead is damaged it must be replaced by the
manufacturer. Return the appliance to the Customer
Care Centre (refer to ‘UK After Sales Service’ section
for further information). No repair must be attempted
by the customer.
• Only use the attachments supplied with this appliance.
• Do not leave the appliance unattended when switched
on or plugged in.
• Do not place the appliance on any surface whilst in
operation.
• Before use, check that the voltage supply corresponds
to the voltage indicated on the appliance.
• Maximum continuous operating time is 20 minutes;
allow to cool for 10 minutes before proceeding.
• Special care is required when using the appliance close
to the ears, eyes, neck and face.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.
• Always switch off and unplug the appliance when
cleaning or when not in use.
• Allow appliance to cool before storing away.
• This appliance contains a lithium ion battery and must
be disposed of safely at the end of its life. Please take
to a recycling centre for safe disposal.
• This product complies fully with all appropriate EU
and UK Legislation and the Standards relevant to this
type and class of appliance. We are an ISO9001:2015
certified company that continually evaluates our
Quality Management System performance. If you have
any queries regarding product safety and compliance,
please contact our Customer Care Centre. (Refer to
‘UK After Sales Service’ section for further information).
INSTRUCTIONS FOR USE
• Charging the appliance - Before using the appliance for the first
time, charge the battery continuously for 3 hours. Maximum battery
capacity will only be reached after 3 completed charging and
discharging cycles.
• Plug the charging adapter into a suitable mains power socket
and switch on. The red LED indicator light will flash when
correctly connected to the mains power and will continuously
flash until the battery has fully charged. When the battery is fully
charged the LED indicator light will stop flashing but remain on.
NOTE: Always place the trimmer in the base with the ‘I/0’ switch in
the OFF position.
• When the clipper is running low on charge, the LED indicator light
will flash, warning there is approximately 3 minutes of battery use
remaining. A 3 hour charge will provide approximately 85 minutes
use. A 30 minute quick charge will provide approximately 30 minutes
use.