BaBylissPro BAB7880U, Руководство пользователя

Страница: 4 / 9

• If the charging light starts to flash rapidly (more than 4 flashes per
second) then the appliance is faulty. If this happens then please stop
charging and remove the adapter from the mains and contact the
Conair Customer Care Line. (See ‘UK After Sales Service’ section for
further information).
•
Preserving the batteries
- In order to maintain the optimum capacity
of the rechargeable batteries, the appliance should be recharged for
3 hours approximately every 3 months.
• Using the trimmer on the mains - ensure that the trimmer is switched
off. Plug into a suitable mains socket. Wait for approximately a
minute, and then switch on.
IMPORTANT
: Do not use the trimmer in this mode for more than 20
minutes.
USE OF THE COMB GUIDES
This trimmer is supplied with 2 comb guides.
No.1 - 6mm
No.2 - 10mm
To attach a comb, hold it by the sides and clip it over the teeth of the
blade. To remove the comb, simply push off.
ZERO GAP ADJUSTMENT TOOL
IMPORTANT! Only ever attempt to zero gap the blades using the
adjustment tool, following the instructions very precisely.
The adjustment tool is required to adjust the blades to zero gap, to
achieve a closer, more precise cut.
Regular Zero Gap
REGULAR ZERO GAP
ZERO GAP
Step 1.
Before placing the blade into the adjustment tool, use the screwdriver
provided to loosen the tension screws, without removing them
completely from the blade holder.