20
USING HOMELIGHT CONNECTED ON FACIAL AREAS
As facial skin is particularly delicate and sensitive, its epilation requires very
special attention.
In this respect, the BaByliss Homelight Connected has a sensitive area filter.
Selective and ultra precise, its smaller surface with a filter to reduce the light
intensity is designed to adjust treatment to the sensitivity of facial skin.
Never look directly at the area being treated when using the appliance.
The sensitive area filter is appropriate for treating your cheeks, upper lip
and chin.
Do not use on the eye lashes, head hair, and eyebrows.
This product is not appropriate for full removal of male beard.
For your comfort and safety, we recommend you have someone help you
for the first few sessions using the Homelight Connected on your face.
To treat facial hair, it is imperative that you attach the sensitive area filter. Its smaller surface
with a filter to reduce the light intensity is intended to treat the face gently. Do not use
Homelight Connected on the face without the sensitive area filter.
The Precise Mode is required when removing facial hair.
DO NOT USE THE FAST MODE TO TREAT THE FACE OR SENSITIVE AREAS.
Your facial skin should be shaven, clean and dry with no remnants of a cream or lotion.
Please do not try to remove hair (whether with, for example, an electric epilator or with wax)
before using the Homelight Connected. Epilation (removing hair by its roots) renders pulsed
light treatment ineffective.
1.
Place the sensitive area filter on the application surface located on the head of your
Homelight Connected before connecting it to a suitable mains power outlet and switching
it on. To put it in place, carefully take hold of the ends of the sensitive area filter with your
thumb and index finger and gently but firmly press it onto the head of the appliance.
Ensure that the filter is correctly positioned.
2. Plug in the unit and press the ON button to switch it on.
3.
In about 1.5 seconds (at level 1) the ‘Ready’ indicator light will come on. The appliance is now
ready to release the first pulse. The appliance is set to the lowest power setting by default.
The power indicator light for level 1 is lit. To treat the face, it is strongly recommended that
you adjust the appliance to the lowest light intensity: level 1.
4.
Firmly press the applicator surface against your skin so that contact is full. Once the
applicator surface is in full contact with your skin, the ‘Ready’ indicator light will start to
flash.
5.
Press the flash release button. The appliance will release a pulse onto the skin and the
‘Ready’ indicator light will go out.
6.
Remove the applicator surface from the treated area of the skin.
