17
NB: The appliance has a mechanism to protect your eyes, a contact sensor that
prevents the appliance from releasing a pulse if its application surface is not in full
contact with your skin. If the appliance is not in full contact with your skin, it will not
release a pulse of light. Make sure, therefore, that the application surface is correctly
applied to your skin.
10.
Press the flash activation/ flash release button. The appliance will release a pulse of light.
You may feel a slight warm and tingling sensation.
11. Remove the application surface from the treated patch of skin.
12.
Move the application surface to another area to be treated. Pressure marks left on
your skin by the application surface should help you to correctly align the epilator to
administer the next pulse, avoiding the release of two pulses on the same patch of
skin or too much space being left between the patches (see ‘Covering the area to be
treated’). Your Homelight Connected will recharge immediately after each pulse. After
1.5 seconds (at level 1), the ‘Ready’ indicator light will come on again. The appliance is
now ready to release another pulse.
Warning: Never treat the same patch of skin more than once per
depilation session!
Repeated treatment of the same area increases the risk of side effects.
