BaByliss 2136U, Руководство пользователя

Страница: 3 / 12

• This appliance is equipped with a safety thermostat. In
the event of overheating the appliance will either stop
automatically or run hot and cold intermittently. Should
this happen, simply slide the switch to the ‘0’ setting,
unplug and allow to cool for 10 minutes. Before use,
ensure the rear filter is clear of hair and other debris. Plug
in and switch on. If the appliance continues to overheat
discontinue use immediately, switch off and unplug, and
contact the Conair Customer Care Line (refer to ‘UK
After Sales Service’ section for further information).
• Do not place the appliance on any heat sensitive surface
whilst in operation.
• Take care to avoid the hot surface of the appliance
coming into direct contact with the skin, in particular the
ears, eyes, face and neck.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.
• Allow the appliance to cool before storing away.
• After use do not coil the lead around the appliance as
this may cause damage to the lead. Instead coil the lead
loosely by the side of the appliance.
• This product complies fully with all appropriate EU
and UK Legislation and the Standards relevant to this
type and class of appliance. We are an ISO9001:2015