RECOMMENDED MATTRESS SIZE:
This cot has been manufactured for use with a mattress which
measures 690 mm wide by 1310 mm long and 150 mm (or
less) in thickness. The width and length are specified because
it is important that the gaps between the mattress and the
sides and ends of the cot will not exceed 40 mm when the
mattress is pushed to one side or end, and 20mm when the
mattress is centred in the cot. The thickness of the mattress
has been specified to ensure that the depth of the cot is greater
than 500 mm with the mattress base in the lower position to
minimize the risk of a child climbing or falling out of the cot.
WARNING:
TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED
TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
Storage:
• Pine woods exchange moisture with the air adjusting to major changes in room temperature and humidity. There-
fore, it is best to place your furniture away from heating or air-conditioning vents.
• Sunlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the
finish. Be careful not to place your furniture in direct sunlight for extended periods of time. As with all your fine furni-
ture, blot up spills immediately.
Care and Cleaning:
• Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with mild soap on a soft rag.
Rinse and dry thoroughly. If you ever refinish this furniture, be sure to use only a non-toxic finish specified for
children’s products. If you choose to refinish this furniture, the warranty will be voided.
10
