baby&child BELLINA 105026, Руководство пользователя

Страница: 10 / 10

HARDWARE FOR STEP #5
Page 10 of 10
STEP #5
TODDLER RAIL ASSEMBLY
STEP #5.1:
Remove the stationary side rail of the Crib by
loosening all the bolts installed as well as the
mattress support.
STEP #5.2:
Gently tilt the Crib and release the bolts underneath
the metal brackets holding the stabilizer rails.
-NOTE: If mattress support is not in the lowest
position, loosen the mattress support bolts and
move to the lowest position.
STEP #5.3
On inside face of both Headboard and Footboard
there is a cavity for the hook which corresponds to
the hooks on both ends of the Toddler Rails . Align
and insert the hook of the Toddler Rail into the
cavity of the Headboard and Footboard. Please see
DETAIL H.
NOTE: Fill the holes located on the top of both sides
of the side panel by inserting bolt (DD) provided.
STEP #5.4
Repeat step #3 Installation of stabilizer rails into the
side panel (DETAIL I)
NOTE:
After assembly, re-tighten all bolts to a snug fit.
DETAIL H


DETAIL I
(DD)
1
4
IN x
1
2
IN. BOLT = 4 PCS
Allen Wrench
DD
DD
DD
DD