* Remove stroller from box. The front wheels, rear wheels, child tray, and
parent tray need to be installed prior to use.
* To attach the front wheels, unfold stroller as described in the section
following. See figure 1.
Lean the stroller backwards so that it rests on the handle and rear frame
tubes and the front wheel tubes are pointing upward.
* Position the front wheel assembly at the front tube such that the hole in the
swivel assembly will slide onto the front tube. Pull upward on the boot
to expose the push button. Push each front wheel assembly onto the front
tube being careful that wheel assembly locks onto the push button on the
front leg. Pull on the wheel assembly to ensure that it is securely attached
to the stroller. Please see figure 2a and 2b.
* Assemble the rear axle as follows: Insert the axle through each wheel and
lock in place with the light colored locking washer. Please see figure 3a.
Snap the cap into the recess in the wheel. Please see figure 3b. Pull on
each wheel to ensure that each is firmly attached to the axle.
* Lean the stroller forward to rest on the front wheels.
Lift upward on the
rear tube of the basket to lock in the up position. See figure 11.
To attach
the rear wheels, position the rear axle and wheel assembly such that the
brake levers are facing to the rear of the stroller. Press the rear wheel
assembly onto the rear frame tubes being careful that the push buttons on
the front of each rear tube engage the hole on the front of each rear wheel
housing. Pull on the rear wheel assembly to ensure that it is securely
attached to the stroller. Please see figure 4.
Ensure that the wheels are firmly locked into place. Do Not use the stroller
if the wheels are not locked into place, but rather contact our customer
service department immediately at (800) 328-7363, between the hours of
8:00am and 4:30pm PCT, for assistance
TO ENSURE SAFE OPERATION OF YOUR STROLLER, PLEASE FOLLOW THESE
INSTRUCTIONS CAREFULLY. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Car Seat
Front Wheels
Parent Tray
PARTS
TO ASSEMBLE STROLLER
Child Tray
Rear Axle
Solid Cap
Locking Cap
Rear Wheels
Stroller
Figure 1.
Base
Car Seat
Hub Cap
Front Wheels
3
Locking
Cap
Solid
Cap
Fig. 2b
Fig. 2a
Fig. 3a
Fig. 3b
Fig. 4
