9. Place knee inside seat and while
pressing down, pull on the free end of the
LATCH lower anchor belt to tighten the
LATCH lower anchor belt around the
car seat .
10. Attach Top Tether Hook to vehicle tether
anchor and . Listen for the “click”
when the tether hook locks onto the
vehicle tether anchor.
11. Pull on the Top Tether Strap to check that
the Tether Hook is securely attached .
12. Pull on free end of Top Tether Strap until
all slack is removed from the Top Tether .
31
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
1
1
2
1
2
1
2
3
4
3
4
Top
Tether
2
32
7.0
Toddler Car Seat (
With
Built-in
Harness) Installation and Use
13. Check for a secure installation by
grasping the car seat armrest and
pushing side-to-side and front-to-back.
The car seat should not move more
than 1 inch in either direction.
• If the car seat moves more than
1 inch, retighten the LATCH belt
and Top Tether and test again.
• If the car seat moves less than 1 inch,
installation is complete. However if the
car seat still moves more than 1 inch,
try another seating position or see the
“Vehicle Seat Belts” section and check
your vehicle owner’s manual for
information on securing car seats.
Tether
Adjuster
