59
60
13.0
Additional Information
13.0
Additional Information
WARNING!
• DO NOT use the Car Seat Without the Seat Pad.
To install Seat Pad / Head Support Pad:
1. Reinstall Seat Pad /Head Support Pad on
Car Seat only when fabric is completely dry.
2. Place Seat Pad on Car Seat then place
the Head Support Pad, thread the Harness
straps through the Seat Pad bottom slots
and pulling the Buckle through the opening
at the rear of the flap on Pad. Thread
the Harness Straps through Buckle
Tongues and Harness-Tie. (Fig 59-1)
3. Move Head Support into highest
position to re-thread harness straps.
4. Use the included Belt Threading Tool and thread
the Harness straps through the slots in the
Seat Pad and Head Support Pad. (Fig 59-2)
5. From the rear of the Car Seat, pull
the Harness Straps through the Slots
until you have enough strap to reach
the Belt Adjuster Plate. (Fig 60-1)
6. Reassemble the Harness Straps to the Belt
Adjuster Plate. Do the left Harness Strap
first, followed by the right Harness Strap.
Check that Harness Straps are completely
within the Belt Adjuster Plate loop (Fig 60-2). You
have two adjustment positions on the harness.
Use Position A for a smaller child, and Position B
for a larger child. If using Position A, loop B must
be on top of the Belt Adjuster Plate. (Fig 60-3)
7. Inspect the Harness Straps from the front and rear to ensure
that they are not twisted. Twisted straps can prevent proper
tightening of the Harness and thus may not adequately
restrain your child in a sharp turn, sudden stop or crash.
Before using the Car Seat, please pull on the Harness Straps
from the front to ensure that they are securely re-attached.
Harness-Tie
Buckle Tongues
59-1
59-2
Belt Threading Tool
A
A
B
60-1
60-3
60-2
A
A
B
B
