71
72
Copyright © 2020, Baby Trend, Inc.
Copyright © 2020, Baby Trend, Inc.
Seat Cut-Away
Buckle
Anchor Bracket
Belt Shortening Clip
5.26.1 Low Birth Weight Harness Shortening Routing Continued
7. Adjust base recline to the full recline postion.
1. See section (5.15 Base Recline page 58).
8. Must use crotch buckle in position 1 and the
belt shortening clip. Always put crotch buckle
and place into position 1 and use the belt
shortening clip (Fig. 71a). See section
(5.25.1 Belt Shortening Clip page 68).
9. Pull the crotch buckle anchor and belt
through to position 2 (Fig. 71a).
10. From top side feed harness loop down
though bottom of seat slot
(1)
(Fig. 72a).
11. Turn car seat over and feed harness loop
end back through slot
(2)
(Fig. 72a).
12. Turn car seat upright and feed through
harness lot
(3)
(Fig. 72a).
13. On opposite side, Turn seat over and feed
harness loop through slot number
(3)
(Fig 72a).
14. From top side feed harness loop end down
through slot number
(2)
(Fig 72a).
15. Turn seat over and feed harness end up
through slot number
(1)
(Fig 72a).
Fig. 71a
Seat Cut-Away
10
11
12
14
15 13
13 or 18
13
Fig. 72a
5.26.2 Low Birth Weight Harness Shortening Routing Continued
Shoulder height
levels
Numbered Slot
adjustments
Crotch buckle
adjustments
1
2
1
1
2
2
3
3
5.0 Installation and Use
Internal Harness Mode
5.0
Installation and Use
Internal Harness Mode
Diagram for
Steps
10-18
