Baby Lock Solaris 2, Инструкция и справочник, Страница: 91 / 224

USEFUL FUNCTIONS
Se
wi
n
g Ba
sics
89
2
Pivoting
If the pivot function is selected, the machine stops
with the needle lowered (in the fabric) and the
presser foot is automatically raised to an
appropriate height when the “Start/Stop” button is
pressed. When the “Start/Stop” button is pressed
again, the presser foot is automatically lowered
and sewing continues. This function is useful for
stopping the machine to rotate the fabric.
a
Select a stitch.
b
Press to select the pivot setting.

The key appears as .
CAUTION
• When the pivot setting is selected, the
machine starts when the “Start/Stop” button is
pressed or the foot controller is pressed down
even if the presser foot has been raised. Be
sure to keep your hands and other items away
from the needle, otherwise injuries may occur.
Memo
• When the pivot setting is selected, the
height of the presser foot when sewing is
stopped can be changed according to the
type of fabric being sewn. Press to
display “Pivoting Height” of the settings
screen. Touch the number to select the
height. To raise the presser foot further,
increase the setting. (Normally, 3.2 mm is
set.)
Note
• The pivot function can only be used with
stitches where presser foot “J”, “N” or “X”
(Couching foot) is indicated in the upper-left
corner of the screen. If any other stitch is
selected, appears as light gray and is
not available.
• If the pivot function is selected, “Presser
Foot Height” in the settings screen is not
available and the setting cannot be
changed.
Note
• To use the pivot function, the needle
position should be set to .
• When the needle position is set to , the
auto up key appears instead of the pivot
key. When the auto up key is set to ,
the presser foot and needle are
automatically raised if the machine is
stopped.