SEWING THE STITCHES
U
tili
ty
S
tit
ch
es
157
3
c
Press the seam allowance open and attach
the zipper with a basting stitch in the
middle of each side of the zipper tape.
a
Basting stitches
b
Zipper
c
Wrong side
d
Remove presser foot “J”. Align the right
side of the pin in zipper foot “I” with the
presser foot holder, and attach the zipper
foot.
a
Right
b
Left
c
Needle drop position
e
Topstitch 7 to 10 mm (approx. 1/4 to 3/8
inch) from the seamed edge of the fabric,
then remove the basting.
CAUTION
• When using zipper foot “I”, make sure the
straight stitch, middle needle position is
selected. Rotate the handwheel toward you
(counterclockwise) to make sure the needle
does not strike the presser foot. If another
stitch is selected, the needle will strike the
presser foot, causing the needle to break and
possibly causing injury.
CAUTION
• Make sure the needle does not strike the
zipper during sewing. If the needle strikes the
zipper, the needle may break, leading to
injury.
Содержание Solaris 2
